K3 Plate Drying, Registration & Exposure All-in-One Machine
The K3 all-in-one unit combines plate drying, registration and exposure in a single pre-press machine for screen printing. Merging three separate machines removes the scattered footprint, wasted floor space and alignment drift of a conventional screen-making workflow, so print shops raise both throughput and accuracy.
- Overview
- One-stop screen-making solution
- Accurate registration
- 1:1 image fidelity
- Faster drying cycle
Key features
Overview
Five stacked drying drawers plus a 6kW hot-air circulation system dry the emulsion quickly. Film registration means every exposure is already in register. The vacuum-free vertical clamp eliminates mesh stretch and holds the image at 1:1 fidelity. A high-density UV-LED exposure system and a 6063-T5 aluminium base plate deliver high energy and even coverage. Suitable for garment printing, electronics, labels and promotional goods.
One-stop screen-making solution
Dries emulsion, registers multi-colour sets and exposes with LED in one unit - floor space saved.
Accurate registration
Image position is controlled at the source, keeping multi-colour work consistent.
1:1 image fidelity
No pattern stretch or shift, so dimensions stay exact and edges stay sharp.
Faster drying cycle
Forced-air circulation dries fast, shortening the screen-making cycle and raising capacity.
Higher exposure efficiency
UV-LED raises exposure speed and stability while cutting energy use.
Simpler operation
The human-centred layout cuts operating complexity - new operators get productive quickly.
Safer to run
A separate control cabinet keeps electronics away from heat and electrical interference.
Applications
Applications
The K3 all-in-one unit is used at the pre-press stage of screen printing, combining emulsion drying, accurate multi-colour registration and LED exposure. It serves garment, label, footwear and webbing printing, signage, electronic components and PCB work where screen quality decides the print.
Specifications
| Three functions in one machine | Emulsion drying, multi-colour registration and LED exposure in a single unit - floor space saved. |
| Lower capital cost | One machine replaces three, freeing floor space and cutting total investment. |
| Five-drawer drying cabinet | Five drawers hold more screens and make them easy to inspect and load. |
| High-speed constant-temperature hot air | An external 6kW circulation heater supplies constant hot air from ambient to 50C to dry emulsion quickly. |
| Film-based registration | The film registration system guarantees accurate alignment: registration is completed at the exposure step, so no positioning error is introduced. |
| No vacuum needed | No vacuum blanket: mechanical spring pressure clamps mesh, film and glass together evenly. |
| High-fidelity output | Removing the rubber blanket removes pattern distortion, holding the image at 1:1. |
| Efficient UV-LED exposure | A high-density UV-LED array gives high power and enough energy for fast, even exposure. |
| Quality aluminium base plate | A 6063-T5 aluminium plate is flat, dissipates heat fast and spreads energy evenly. |
| Model | DGNUVLED90120 |
| Main unit dimensions | L1740mm W1350mm H990 |
| Control cabinet dimensions | L700MM W370mm H850 |
| Max frame area | 900mmX1200mm |
| Total power | 9Kw |
| Drying cabinet power | 6Kw |
| Drying cabinet temperature range | Ambient - 50 C |
| Light source | UVLED |
| UV-LED power | 2Kw |
| Control | PLC, fully automatic |
| Display | Touch screen |
| Registration method | Film registration |
| Film clamping | Mechanical vertical weight clamping |
Get a tailored configuration and quote
Custom configurations · sample testing · remote installation guidance